Back to products

Solar

segell

Sectors

Outdoor Contract Healthcare Leisure Decoration

Aplications

Chairs Armchairs Sofas Stools Puffs Soft seating Retail Leather Contract furniture Geriatric furniture Medical furniture Children's furniture Home furniture Outdoor furniture Hammock Cruise furniture Decoration accessories Cojines

Description

Manufactured with polyolefinic material, the Solar article has been created to respond to Outdoor furniture manufacturers, in their search to find soft textures and with good hand, moving away from the hardness of the existing plastic materials today. Resistant to dirt, which does not penetrate inside, as it is a polyolefin material, it is by its nature inert, non-toxic and does not absorb odours. All this makes it a “differential” option for outdoor furniture and also for interior due to the aforementioned characteristics.

Features

Indoor and outdoor use Non-toxic Recyclable Bad odour resistant Dirt resistant High resistance to abrasion

Technical specifications

Composition

95% Polyolefin | 5% Acrylic

Width

140cm ± 2%

Weight

784 g/mI ± 5%
560 g/m2 ± 5%

Piece length

30 mts ± 10%

thickness

Normatives

Abrasion resistance

EN ISO 12947-2
80.000 Martindale Cycles

Pilling

UNE EN ISO 12945-2: 4-5
(scale 1-5; 5 best value)

Colour fastness to light

EN ISO 105-B04 (artificial weathering): 6-7
(scale 1-8; 8 best value)

Colour fastness to rubbing

UNE EN ISO 105-X12
Dry: 4-5 | Wet: 4-5

Tensile strength

UNE EN ISO 13934-1
Warp: 2200 N | Weft: 1800 N

Tear resistance

UNE EN ISO 13937-3
Warp: 261 N | Weft: 657 N

Acoustic absorption

Electrostatic dissipative

Charge sink

Environmental certificate

Marine

Railway

Seam slippage resistance

UNE EN ISO 13936-2
Warp: 1,40 mm | Weft: 2,50 mm

Resistance to water penetration

Fastness to water

UNE EN ISO 105-E01: 4-5
(scale 1-5; 5 best value)

Fastness to sea water

UNE EN ISO 105-E02: 4-5
(scale 1-5; 5 best value)

Fastness to swimming pool water

UNE EN ISO 105-E03: 4-5
(scale 1-5; 5 best value)

Spray test

Flammability

UE: EN 1021 1
UK: BS 5852 0
USA: CAL TB 117 Section 1
USA: NFPA 260 Class 1

Blood fastness

Fastness to urine

UNE EN ISO 105-E01: 4-5
(scale 1-5; 5 best value)

Fisnish

Sanitary

Outdoor

Environmental certificate

segell
producto-co2-calculated-ENproducto-co2-calculated-EN

Cleaning, use and maintenance recommendations

Maximum washng temperature 30ºCAny bleach allowedDo not tumble dryDo not ironDo not dry-clean

To prevent overall soil, frequent vacuuming, or light brushing to remove dust is recommended. Most dirt and stains can be cleaned if they are promptly treated. The fabric can be washed at low temperature (<90°F / 30°C) with lukewarm water using a mild soap.

Do not dry in electric or gas dryers and avoid to ironing the fabric. 

Excessive heat will shrink the fabric. Do air or line dry.

Store it protected from inclement weather.
Do not place next to reflecting surfaces or heating elements.

Non-greasy marks: warm water spot clean with half a spoonful of any standard washing powder in a cup of hot water. Blot the stain with a cloth or a sponge dampened with this solution, from the outside to the inside of the stain. Do not rub it. Once the spot is removed, sprinkle the area with clean water to remove possible traces of powder. Do not use stain removers. If using a chlorine-rich cleaner, do not leave it to dry in direct sunlight.

Oil or grease spots: Butter, oil, lipstick, and the like must be removed with acetone. Once the mark has been removed, apply a solution of washing powder to the fabric and rinse it off with clean water exactly as for stains that are soluble in water.

 To prevent deposits of dirt, it is recommended to frequently vacuum or lightly brush it to remove dust. Most dirt and stains can be cleaned if they are promptly treated.

Recommendations for upholstery

Recommendations for upholstery of fabrics of Polyolefin material (Polypropylene).

With the experience of more than 25 years manufacturing textiles of Polyolefin material (Polypropylene), Exit Fabrics recommends to our customers to reinforce the seams with a double overlock and with an additional support. Due its “intrinsic” characteristics being a plastic material, this textile could be opened by sliding seams, these are the same characteristics that give it a magnificent durability and a better aging than other synthetic fibers.

Colour matching

Variations can occur from batch to batch (3%).

We reserve the right to modify the technical specifications without prior notice. Any color outside the letter can be manufactured under minimal quantities.

Download digital catalog