![segell](/wp-content/uploads/2024/12/OUTDOOR-3.png")
Real size sample
Fabric photo scans are shown as a guide and there may be colour variations depending on your screen. We recommend that you request a fabric sample before placing your order.
EN ISO 12947-2
70.000 Martindale cycles
UNE EN ISO 12945-2: 4-5
(scale 1-5; 5 best value)
EN ISO 105-B04 (Lightfastness to weather): 6-7
(scale 1-8; 8 best value)
UNE EN ISO 105-X12
Dry: 4-5 | Wet: 4-5
UNE EN ISO 13934-1
Warp: 2200 N | Weft: 1800 N
UNE EN ISO 13937-3
Warp: 367 N | Weft: 274 N
UNE EN ISO 13936-2
Warp: 3,00 mm | Weft: 2,50 mm
UNE EN ISO 105-E01: 4-5
(scale 1-5; 5 best value)
UNE EN ISO 105-E02: 4-5
(scale 1-5; 5 best value)
UNE EN ISO 105-E03: 4-5
(scale 1-5; 5 best value)
UE: EN 1021 1
UK: BS 5852 0
USA: CAL TB 117 Section 1
USA: NFPA 260 Class 1
Recommendations for upholstery of fabrics of Polyolefin material (Polypropylene).
With the experience of more than 25 years manufacturing textiles of Polyolefin material (Polypropylene), Exit Fabrics recommends to our customers to reinforce the seams with a
double overlock and with an additional support. Another possibility that would provide the upholstery a superior finish and greater durability would be to put foam or a stabilizing mesh (see finishes). Due its “intrinsic” characteristics being a plastic material, this textile could be opened by sliding seams, these are the same characteristics that give it a magnificent durability and a better aging than other synthetic fibers.
Maximum washng temperature 30ºC
Any bleach allowed
Do not tumble dry
Do not iron
Do not dry-clean
The best way of protecting your Outdoor fabric from wear and tear and loss of colour is to keep it clean and protected during inclement weather.
Prevention and treatment of stains
To prevent overall soil, frequent vacuuming, or light brushing to remove dust is recommended. Most dirt and stains can be cleaned if they are promptly treated. The fabric can be washed at low temperature (<90°F / 30°C) with lukewarm water using a mild soap.
Do not dry in electric or gas dryers and avoid to ironing the fabric.
Excessive heat will shrink the fabric. Do air or line dry.
Store it protected from inclement weather.
Do not place next to reflecting surfaces or heating elements.
Non-greasy marks: warm water spot clean with half a spoonful of any standard washing powder in a cup of hot water. Blot the stain with a cloth or a sponge dampened with this solution, from the outside to the inside of the stain. Do not rub it. Once the spot is removed, sprinkle the area with clean water to remove possible traces of powder. Do not use stain removers. If using a chlorine-rich cleaner, do not leave it to dry in direct sunlight.
Oil or grease spots: Butter, oil, lipstick, and the like must be removed with acetone. Once the mark has been removed, apply a solution of washing powder to the fabric and rinse it off with clean water exactly as for stains that are soluble in water.
Use and maintenance
Although the Outdoor fabrics by Exit Fabrics are for the exterior, mould and fungi may appear if the fabric remains damp for too much time.
Exposure to sunlight
Although the Outdoor fabrics by Exit Fabrics are resistant to UV rays, prolonged exposure to sunlight will eventually affect the resistance and colour of the fibres. Particularly in very hot climates, it would be better to look for shade as much as possible, or create it, by means of parasols, canopies or plants, and use protective coverings when the furniture is not in use.
Exposure to rain
The Outdoor fabrics by Exit Fabrics are water-resistant, but the rain often contains dirt and atmospheric pollution that may cause wear and tear on the fabric, and prolonged exposure to rain and dampness may cause the appearance of mould and fungi. For these reasons, the cushions should be put away separately or the furniture protected by coverings when the weather forecasts is of rain, and never leave the furniture exposed to rainy weather or dampness for a long time.
Exposure of the furniture off-season
During the winter or when the furniture is not going to be used for a lengthy period, it should be put away or covered with protective coverings. Before putting it away, the fabric must be clean and completely dry. Avoid keeping it in damp places. On putting them away, it is better not to wrap the cushions in plastic since this may cause the appearance of moulds or fungi.
We would be delighted to attend to you if you have any doubt that may arise regarding this or other information.
We reserve the right to modify the technical specifications without prior notice. Any color outside the letter can be manufactured under minimal quantities.
Download digital catalog