Real size sample
Fabric photo scans are shown as a guide and there may be colour variations depending on your screen. We recommend that you request a fabric sample before placing your order.
EN ISO 12947-2
> 200.000 Martindale cycles
EN ISO 105-B04 (Lightfastness to weather): 7-8
(scale 1-8; 8 best value)
Directive 2014/90/EU (Marine Equipment)
Hydrostatic pressure test:
EN ISO 811: >1.000 (Average cm/H2O)
UE: EN 1021 1/2
UK: BS 5852 0/1
UK: BS 5852 CRIB 5
F: NF P92-507 Classification M.2
F: NF D 60-013 AM 18
I: UNI 9175 Class 1.IM
USA: CAL TB 117: Section 1
USA: NFPA 260: Class 1
IMO MSC.307 (88) Annex 1 I Part 8
ISO 16603 Method C: Pass
ISO 16603 Method C: Pass
EN ISO 10993-5:
Grade 0 – No cytotoxic effect
EN 71-3:
Meets migration requirements
Chemical resistance
Hydrophobic surface
Resistant to disinfectants
Supreme stain resistance – easy-to-clean surface
PVC/PUR-free
Plasticizer-free – migration resistant
Solvent-free
Free from added flame retardants
No toxic combustion gases
Phthalate-free
Low emission
Excellent flame retardancy
Extremely heat- and cold-resistant
Resistant to oxygen, UV radiation and other weathering influences
Flexibility over a wide temperature range
Hand cleaning
Do not bleach
Do not tumble dry
Do not hand dry
Do not iron
Do not dry-clean
Ecosoft F.R features an easy-care surface, designed to make it easy to clean common stains from daily use.
It is recommended that the surface be cleaned regularly every 3 to 4 weeks.
Spilled liquids or substances must be removed as soon as possible to prevent them from penetrating or sticking to the surface.
For stain removal, it is recommended to clean the surface with water or a solution of water and neutral soap. Moisten a microfiber cloth or soft brush with the soap solution and clean by gentle circular movements, avoiding excessive pressure on the surface until dirt and surface marks are removed. Once cleaning is complete, remove any soap residue with a cloth dampened in clean water. Finally, dry the surface with a clean and dry cloth.
Do not use:
-Adhesives containing solvents.
-Organic solvents, such as gasoline, kerosene or other similar products.
-Abrasive cleaning products, scouring pads or utensils that may damage the surface.
Use of additional maintenance products does not improve the quality or extend the life of the product.
Ecosoft F.R can be cleaned with disinfectants suitable for synthetic or artificial surfaces. The compatibility of disinfectants manufactured outside the European Union must be assessed in advance in each case.
Certain clothing and accessory dyes (such as those used in jeans or other dyed textiles) may migrate to lighter-coloured surfaces. Exit Fabrics, S.L. will not assume any liability for claims of colour transfer caused by external contaminants, nor for claims of permanent stains caused by this phenomenon.
These cleaning and maintenance recommendations are for guidance only and do not constitute a warranty. Also, they do not exempt the user from acting with due diligence in handling the product or in selecting and applying cleaning or disinfecting products.
We reserve the right to modify the technical specifications without prior notice.
Download digital catalogWe would be delighted to attend to you if you have any doubt that may arise regarding this or other information.