![segell](/wp-content/uploads/2023/10/OUTDOOR-1.png")
Real size sample
Fabric photo scans are shown as a guide and there may be colour variations depending on your screen. We recommend that you request a fabric sample before placing your order.
EN ISO 12947-2
50.000 Martindale Cycles
EN ISO 12945-2: 4-5
(scale 1-5; 5 best value)
EN ISO 105-B04 Method 2: 7-8
(scale 1-8; 8 best value)
(artificial weathering)
EN ISO 105-X12
Dry: 4-5 |Wet: 4-5
UNE EN ISO 13934-1
Warp : >1000 N | Weft: >1000 N
EN ISO 13937-3
Warp: 164 N | Weft: 158 N
UNE EN ISO 13936-2
Warp: 2,50 mm | Weft: 2,00 mm
Hydrostatic pressure test:
EN ISO 811
285 (Average cm/H²O)
UNE EN ISO 105-E01: 4-5
(scale 1-5; 5 best value)
UNE EN ISO 105-E02: 4-5
(scale 1-5; 5 best value)
UNE EN ISO 105-E03: 4-5
(scale 1-5; 5 best value)
UE: EN 1021 1
UK: BS 5852 0
USA: CAL TB 117 Section 1
USA: NFPA 260 Class 1
ISO 16603 Method C : Pass
UNE EN ISO 105-E01: 4-5
(scale 1-5; 5 best value)
Water repellent
![segell](/wp-content/themes/exitfabrics/assets/segell/OTS100_label_2015OK0891_en.png")
Do not dry-clean
Maximum washng temperature 30ºC
Any bleach allowed
Do not tumble dry
Do not iron
To prevent overall soil, frequent vacuuming, or light brushing to remove dust is recommended. Most dirt and stains can be cleaned if they are promptly treated. The fabric can be washed at low temperature (<90°F / 30°C) with lukewarm water using a mild soap.
Do not dry in electric or gas dryers and avoid to ironing the fabric.
Excessive heat will shrink the fabric. Do air or line dry.
Store it protected from inclement weather.
Do not place next to reflecting surfaces or heating elements.
Non-greasy marks: warm water spot clean with half a spoonful of any standard washing powder in a cup of hot water. Blot the stain with a cloth or a sponge dampened with this solution, from the outside to the inside of the stain. Do not rub it. Once the spot is removed, sprinkle the area with clean water to remove possible traces of powder. Do not use stain removers. If using a chlorine-rich cleaner, do not leave it to dry in direct sunlight.
Oil or grease spots: Butter, oil, lipstick, and the like must be removed with acetone. Once the mark has been removed, apply a solution of washing powder to the fabric and rinse it off with clean water exactly as for stains that are soluble in water.
To prevent deposits of dirt, it is recommended to frequently vacuum or lightly brush it to remove dust. Most dirt and stains can be cleaned if they are promptly treated.
Recommendations for upholstery of fabrics of Polyolefin material (Polypropylene).
With the experience of more than 25 years manufacturing textiles of Polyolefin material (Polypropylene), Exit Fabrics recommends to our customers to reinforce the seams with a double overlock and with an additional support. Due its “intrinsic” characteristics being a plastic material, this textile could be opened by sliding seams, these are the same characteristics that give it a magnificent durability and a better aging than other synthetic fibers.
We reserve the right to modify the technical specifications without prior notice.
Download digital catalog