Back to products

Star

Sectors

Decoration Acoustic

Aplications

Vertical surfaces Screens Acoustic panels Decoration accessories

Description

Star belongs to the Sun and Moon textile family. It is a double-coth vigoré fabric with a craft appearance, although unlike its two sister collections, Star is not suitable for upholstering seats due to its long weave. Its enlarged weave is designed for vertical surfaces (decorative panels, false ceilings, headboards, screens, acoustic panels, etc...), decorative accessories, such as cushions or also in the leatherwork sector for making bags.

Features

Indoor and outdoor use
*
 Acoustic absorption 100% Recyclable Antibacterial Dirt resistant Non-toxic Inert Antistatic Bad odour resistant
Star

Technical specifications

Composition

100% Polyolefine

Width

140 cm ± 2%

Weight

462 g/ml ± 5%
330 g/m2 ± 5%

Piece length

35 mts ± 10%

thickness

Normatives

Abrasion resistance

EN ISO 12947-2
100.000 Martindale cycles

Pilling

EN ISO 12945-2: 4-5
(scale 1-5; 5 best value)

Colour fastness to light

EN ISO 105-B02 Method 2: 6-7
(scale 1-8; 8 best value)

Colour fastness to rubbing

EN ISO 105-X12
Dry: 4-5 | Wet: 4

Tensile strength

Tear resistance

EN ISO 13937-3
Warp: 340 N | Weft: 200 N

Acoustic absorption

EN ISO 10534-2
Acoustic absorption peak: 0,9

Electrostatic dissipative

EN 61340-5-1
Surface resistance ≤ 10 10Ω

Charge sink

EN 1149-3-5
Semi-discharge time < 4s

Environmental certificate

Marine

Railway

Seam slippage resistance

Resistance to water penetration

Fastness to water

Fastness to sea water

Fastness to swimming pool water

Spray test

Ultraviolet Protection Factor (UPF)

Flammability

UE: EN 1021 1
UK: BS 5852 0
USA: CAL TB 117 Section 1
USA: NFPA 260 Class 1
Regulation nº 118 UNECE Annex 6

Blood fastness

Fastness to urine

Fisnish

Sanitary

Outdoor

Environmental certificate

segell
producto-co2-calculated-ENproducto-co2-calculated-EN

Recommendations for upholstery

Recommendations for upholstery of fabrics of Polyolefin material (Polypropylene).

With the experience of more than 25 years manufacturing textiles of Polyolefin material (Polypropylene), Exit Fabrics recommends to our customers to reinforce the seams with a
double overlock and with an additional support. Another possibility that would provide the upholstery a superior finish and greater durability would be to put foam or a stabilizing mesh (see finishes). Due its “intrinsic” characteristics being a plastic material, this textile could be opened by sliding seams, these are the same characteristics that give it a magnificent durability and a better aging than other synthetic fibers.

Recommendations of use and maintenance

Maximum washng temperature 30ºCAny bleach allowedDo not ironDry cleaning

Polyolefin articles are suitable for outdoors, since, if they get wet, they dry without the humidity affecting them. Polyolefin fibre is produced by extrusion (mass dyeing), so that it has better solidity to light than conventional fibres made with thread dying or by piece. The recommended colours for outdoors are natural ones, beiges or greys, since in these ranges of colours, the variation of colour due to the impact of UV rays (ultraviolet) is much less visible optically. In contrast we should avoid reds, blues and greens, where according to each colour (they do not all have the same variation) and according to the intensity of the colour, there may be a variation of colour visible after 480 hours of solar exposure, the equivalence to the hours of solar exposure, according to the standard EN ISO 105-B04.

Vacuum regularly. In case of stains, use a damp cloth with neutral soap suitable for cleaning of upholstery products.

We would be delighted to attend to you if you have any doubt that may arise regarding this or other information.

Colour matching

Variations can occur from batch to batch (3%).

We reserve the right to modify the technical specifications without prior notice.

Download digital catalog