Real size sample
Download samples
Fabric photo scans are shown as a guide and there may be colour variations depending on your screen. We recommend that you request a fabric sample before placing your order.
Real size sample
Fabric photo scans are shown as a guide and there may be colour variations depending on your screen. We recommend that you request a fabric sample before placing your order.
EN ISO 5470-2
500.000 Martindale cycles
EN ISO 12947-2
500.000 Martindale cycles
IMO Resolution MSC.307 (88)-FTP-
Code 2010, Annex I Part 8
Directive 2014/90/EU
(Marine Equipment Directive)
UIC-564-2-VE Appendix 5
classification B.
UE: EN 1021 1/2
UK: BS 5852 0/1
F: NF P92-507 Classification M.2
F: NF D 60-013 AM 18
ES: UNE 23 727-90 1R Class M.2
I: UNI 9175 Class 1.IM
AT: ÖNORM B 3825 Group 1
AT: ÖNORM A 3800 Part 1, Q1
USA: CAL TB 117: Section 1
USA: MVSS 302
FAR 25/853
VINYL-SAVE
Biocompatibility
DIN EN ISO 10993-5 Cytotoxicity
DIN EN ISO 10993-10 Irritation and
delayed-type hypersensitivity
Biological harmlessness according:
DIN EN ISO 10993-1
Phthalates free= 0 AZO | Cd | Pb | Sb | Cr (VI) | Ni | As | Hg | PAK | PCP
Contract upholstery vinyls suitable also for outdoor aplications.
For upholstering fabrics intended for seating furniture (seats for cinemas, theatres, and auditoriums), Exit Fabrics suggest purchasing the product with foam already bonded to the fabric (see finishes). The thickness of the foam to be applied will range between 3 mm and 5 mm, depending on the project. This allows the fabric to be secured, providing greater stability and durability to the product. Leaving the upholstery loose is not recommended, as it may accelerate deterioration. This is the system used by all professionals of furniture intended for this sector to upholster these products. When the upholstery is done correctly, the fabric becomes a monobloc, remaining fixed and without movement.
Hand wash
Do not bleach
Do not tumble dry
Do not hand dry
Do not iron
Do not dry-clean
In order to attain the maximum durability that the vinyls provide, due to the excellent results obtained in our official laboratories, you should know that any vinyl article manufactured in either PVC, PU or a mixture of them, will be affected by cleaning products that can be used, damaging the protective layer of the vinyls, sooner or later destroying the upholstered product, according to its quality. This is why you cannot use cleaners, detergents, lacquers, solvents with alcohol mixtures, xylene-based liquids, acetone or MEK, which damage and exponentially cut the useful life of the upholstered material. The use of these cleaners is entirely your responsibility.
Certain garments and accessory dyes (such as those used in trousers or jeans) can migrate to lighter surfaces. This phenomenon increases with the effects of humidity and temperature, and is irreversible. EXIT FABRICS S.L. accepts no responsibility for claims of colour transfer caused by this phenomenon. Adhere strictly to the recommendations described for each material.
Vinyl must be cleaned periodically to maintain its appearance and avoid the accumulation of contaminants and dirt. All stains, spills or dirt should be cleaned quickly to avoid permanent staining. Use pH neutral soapy solutions or special products for vinyl fabrics to eliminate surface stains on the material. Clean only with a clean white cloth dampened with warm water, rubbing with gentle circular movements. For more difficult stains use a soft brush with a neutral soap solution and warm water, rubbing with circular movements. The surface that has been washed with soap should then be cleaned with a microfiber cloth dampened with clean water. Dry the surface!
Variations can occur from batch to batch.
We reserve the right to modify the technical specifications without prior notice.
Download digital catalogWe would be delighted to attend to you if you have any doubt that may arise regarding this or other information.
