Real size sample
Download samples
Fabric photo scans are shown as a guide and there may be colour variations depending on your screen. We recommend that you request a fabric sample before placing your order.
Real size sample
Fabric photo scans are shown as a guide and there may be colour variations depending on your screen. We recommend that you request a fabric sample before placing your order.
EN ISO 12947-2
100.000 Martindale cycles
EN ISO 12945-2: 4-5
(scale 1-5; 5 best value)
EN ISO 105-B02 Method 2: 6-7
(scale 1-8; 8 best value)
EN ISO 105-X12
Dry: 4-5 | Wet: 4
EN ISO 13937-3
Warp: 320 N | Weft: 190 N
EN ISO 10534-2
Acoustic absorption peak: 0,9
EN 61340-5-1
Surface resistance ≤ 10 10Ω
EN 1149-3-5
Semi-discharge time < 4s
UE: EN 1021 1
UK: BS 5852 0
USA: CAL TB 117 Section 1
USA: NFPA 260 Class 1
Regulation nº 118 UNECE Annex 6
Maximum washng temperature 30ºC
Any bleach allowed
Do not iron
Dry cleaning
Polyolefin articles are suitable for outdoors, since, if they get wet, they dry without the humidity affecting them. Polyolefin fibre is produced by extrusion (mass dyeing), so that it has better solidity to light than conventional fibres made with thread dying or by piece. The recommended colours for outdoors are natural ones, beiges or greys, since in these ranges of colours, the variation of colour due to the impact of UV rays (ultraviolet) is much less visible optically. In contrast we should avoid reds, blues and greens, where according to each colour (they do not all have the same variation) and according to the intensity of the colour, there may be a variation of colour visible after 480 hours of solar exposure, the equivalence to the hours of solar exposure, according to the standard EN ISO 105-B04.
We would be delighted to attend to you if you have any doubt that may arise regarding this or other information.
Recommendations for upholstery of fabrics of Polyolefin material (Polypropylene).
With the experience of more than 25 years manufacturing textiles of Polyolefin material (Polypropylene), Exit Fabrics recommends to our customers to reinforce the seams with a
double overlock and with an additional support. Another possibility that would provide the upholstery a superior finish and greater durability would be to put foam or a stabilizing mesh (see finishes). Due its “intrinsic” characteristics being a plastic material, this textile could be opened by sliding seams, these are the same characteristics that give it a magnificent durability and a better aging than other synthetic fibers.
We reserve the right to modify the technical specifications without prior notice. Any color outside the letter can be manufactured under minimal quantities.
Download digital catalog