Back to products

Alba F.R.


Contract Healthcare Office Home Decoration Seating Leisure


Chairs Armchairs Sofas Stools Puffs Seating Cinema seating Auditorium seat Soft seating Stretcher Bed headboards Retail Leather Geriatric furniture Medical furniture Contract furniture Office furniture Vertical surfaces Decoration accessories


Alba FR is a vinyl suitable for both the home and contract sectors. Pleasant to the touch, it has a smooth matt finish in a sober colour range. It adapts well for upholstering furniture with a rigid and flexible surface.


Flame retardant Indoor use Sanitary treatment Dirt resistant IMO Certificate

Technical specifications


65% PES 35% PU


140 cm ± 2%


728 g/ml ± 5%
520 g/m2 ± 5%

Piece length

40 mts ± 10%



Abrasion resistance

EN ISO 12947-2
100.000 Martindale cycles


Colour fastness to light

EN ISO 105-B02 Method 2: 5-6
(scale 1-8; 8 best value)

Colour fastness to rubbing

Tensile strength

Tear resistance

Acoustic absorption

Electrostatic dissipative

Charge sink

Environmental certificate



Seam slippage resistance

Resistance to water penetration

Fastness to water

Fastness to sea water

Fastness to swimming pool water

Spray test


UE: EN 1021 1/2
UK: BS 5852 0/1
UK: BS 7176 Low Hazard
F: NF P92-507 Classification M.2
F: NF D 60-013 AM 18
ES: UNE 23 727-90 1R Class M.2
I: UNI 9175 Class 1.IM
USA: CAL TB 117 Section 1
USA: NFPA 260 Class 1
Regulation nº 118 UNECE Annex 6
IMO MSC.307 (88) Annex I Part 8
FAR 25.853 a) Appendix F, Part I, (a) (1) (ii)

Flammability performance is dependent
on foam used.

Blood fastness

Fastness to urine



ISO 22196
ISO 16603


Environmental certificate

Cleaning, use and maintenance recommendations

Do not bleachDo not tumble dryDo not ironDo not dry-cleanDo not hand dry

In order to attain the maximum durability that the vinyls provide, due to the excellent results obtained in our official laboratories, you should know that any vinyl article manufactured in either PVC, PU or a mixture of them, will be affected by cleaning products that can be used, damaging the protective layer of the vinyls, sooner or later destroying the upholstered product, according to its quality. This is why you cannot use cleaners, detergents, lacquers, solvents with alcohol mixtures, xylene-based liquids, acetone or MEK, which damage and exponentially cut the useful life of the upholstered material. The use of these cleaners is entirely your responsibility. 

Certain garments and accessory dyes (such as those used in trousers or jeans) can migrate to lighter surfaces. This phenomenon increases with the effects of humidity and temperature and is irreversible. EXIT FABRICS S.L. accepts no responsibility for claims of colour transfer caused by this phenomenon. Adhere strictly to the recommendations described for each material. 

Vacuum regularly. In case of stains, use a damp cloth with neutral soap suitable for cleaning of upholstery products.

The flame-retardant properties of the yarns of the fabrics can be affected by external factors, such as the accumulation of dust, environmental dirt, dirt by use, soap residues, softeners and cleaning products in general. All of these factors can cause the loss of the product’s fireproofing over time. 

We would be delighted to attend to you if you have any doubt that may arise regarding this or other information.

Colour matching

Variations can occur from batch to batch (3%).

We reserve the right to modify the technical specifications without prior notice. Any color outside the letter can be manufactured under minimal quantities.

Download digital catalog